At some point of you life, you may have come with the idea of starting your own environmental consulting firm. This article can help you to make your project real or, if it is not, you will know it in a short time.
Read MoreIn this opportunity we will present the best scientific articles to learn about the OpenFOAM capacities in the coastal engineering field.
Read MoreIn this tutorial we will show you how to install QSWAT, QGIS interface for SWAT.
Read MoreOver the past few years, environmental technology has improved and become very accessible to the final consumers. It is possible to find environmental sensors at a low cost which can be connected to low cost microprocessors like Raspberry Pi. Raspberry Pi has the capacity to monitor with readings over a long period of time and save them online.
Read MoreSWAT is an open source model that can be used with GIS data to simulate hydrological processes in basins. The SWAT complement is a tool to evaluate soil and water and basin management. The QGIS interface is called QSWAT. The latest version is QSWAT 1.4 which was released on Feb. 2, 2017.
Read MoreEvapotranspiration is the mixed process of soil evaporation and transpiration of plants. This process is not included in many Hydrology books or in hydrological methods like the rational method, SCS, among others. Evapotranspiration is not relevant in when calculating maximum floods, but it is considered in water balances of superficial water and groundwater.
This article shows the relevance of the evapotranspiration process in the conceptualization and modeling of groundwater, indicating which would be the errors and inaccuracies of not considering this process.
Read MoreWe see groundwater as a water reservoir inside the earth crust. It is defined that the top of the groundwater reservoir is called water table, but we rarely ever ask ourselves how deep groundwater is or about its quality. A complete vision of the hydrogeological system requires the understanding of the current state of groundwater quality and quantity.
Read MoreModel optimization involves adjusting parameter values so that the simulated results match stream flows as closely as posible. The software have two different search algorithms for the optimization as well as a variety of objective functions to measure the goodness of fit between simulated and observed stream flow.
Optimization trials are quite simple to set up and compute. This tutorial show the complete procedure to run a optimization for a hydrological model on a andean basin.
Read MoreA hydrogeological evaluation needs a numerical representation of the groundwater flow regime. Numerical models are a great tool to evaluate the current and future conditions of groundwater flow. In order to make a model, it is necessary to have geological and climate data, among other types.
The following list describes the input data needed to carry out a hydrogeological modeling. The information required could be either in tabular or vectorial format.
Read MoreSentinel-2 carries an innovative wide swath high-resolution multispectral imager with 13 spectral bands for a new perspective of our land and vegetation. The mission is based on a constellation of two identical satellites in the same orbit, 180° apart for optimal coverage and data delivery. Together they cover all Earth’s land surfaces, large islands, inland and coastal waters every five days at the equator (source ESA).
This is a group of videos called "Working with Sentinel 2 Imagery on QGIS" that shows the complete procedure to download, represent and process Sentinel 2 images in QGIS.
Read MoreThis tutorial show the procedure to create contours from a raster file considering interval definition. The example is made from a NDVI raster file.
Read MoreThis tutorial show the procedure to cut a NDVI Raster File calculated from a Sentinel 2 Granule on QGIS.
Read MoreImpact on groundwater flow from mining facilities could be evaluated many times along the different mining phases, many of these evaluations are done by different consultant companies. This post is focused on strategies and best practices for cost (& time) optimization, specially for hydrogeological investigation on mining projects.
Read MoreThis tutorial show the prodecure to calculate the NDVI from Sentinel 2 bands on QGIS.
Read MoreFalse color images are used to enhance certain cover types as vegetation on the image representation. This tutorial show the procedure represent the bands of a False Color image from Sentinel 2 bands in QGIS.
Read MoreThis tutorial show the procedure represent the bands of a Sentinel 2 Granule (Image) in QGIS. The representation of the image is True Color (Red, Green and Blue)
Read MoreIn order to make a hydraulic modeling with HEC-RAS, one of the most important input data needed is the river and cross sections geometry. However this data is not always available.
In this opportunity we want to present a QGIS complement called Q-RAS that, in a very simple way, creates the geometry data using a DEM file.
Read MoreIn the actual society, the environmental aspects are a concern when planning projects related to water resources. In this context, numerical models are useful tools to represent the superficial water and groundwater cycle and determine the contamination effects.
Read MoreInteresting tutorial that explains how to make a map with QGIS.
Read MoreThe Sentinel 2 satellites have a Multi-Spectral Instrument (MSI) with 13 spectral bands that range from the visible range to the shortwave infrared (SWIR). Bands come in variable resolutions from 10 to 60 meter and their wavelenght is determined based on specific purposes.
Read MoreHatarilabs presents its educational program designed for mastering Python in real professional and academic environments. The program has an extensive practical work that goes from the basic concepts of Python, Numpy and Pandas to specific applications in water resources and geosciences coupled with geospatial analysis and machine learning.
We have designed a complete program on MODFLOW with Model Muse that ranges from the essential topics in flow and transport modeling to applied cases of regional modeling, infrastructure projects, and seawater intrusion. MODFLOW with Model Muse is a recent open-source software that provides various tools for simulating the groundwater flow regime in different environments.
This program is designed to provide systematical learning from the most basic and general topics to intermediate and advanced topics, allowing the student to understand the various steps in developing hydrological models using the SWAT+ interface for QGIS. This program has a series of theoretical and practical concepts that allow the student to process spatial data, manage meteorological databases, build hydrological models, develop sensitivity analyses, and perform manual and automatic calibrations using versatile tools such as SWAT+ Toolbox, SQLite, and Python.
ONLINE COURSES:
Phreeqc is a software developed by the USGS written in C++ capable of modeling a variety of aqueous geochemical processes such as mixing of waters, modeling equilibrium between solid and aqueous phase, modeling impact of temperature, calculation of element concentration among others.
Hatarilabs has developed an applied and unique course of Phreeqc integrated with Python undes a class (object type) that can run, parse and provide Phreeqc output as Pandas dataframes and integrate it to plots and further analysis with other Python libraries on a Jupyter notebook.
HEC-RAS is a software designed to perform hydraulic 1D and 2D calculations on river channels either natural or man constructed. It allows steady flow, unsteady flow, sediment transport and water quality modelling. It is developed by the US army corps of engineers, US Department of defence and it is openly available software. The HEC-RAS steady flow is based on one dimensional energy equation, while for the unsteady flow, HEC-RAS uses an implicit, finite difference method to solve the fully dynamic Saint-Venant equations.
The objective of HEC-RAS is to solve river dynamics and river engineering problems. Applications are delimitation of flood areas, embankment and protection work design, river restoration, emergency plans for dam break, optimization of hydraulic work and risk assessment and management.
This course develops the main functions and applications of the latest version of the MODFLOW 6 groundwater modeling code through the ModelMuse interface, both developed by the United States Geological Survey (USGS). This version includes innovative tools for the construction and simulation of hydrogeological models, mainly highlighting the incorporation of the discretization option for discretized by vertices grids.
The development of machine learning and geospatial libraries in Python as Scikit Image, Rasterio and Fiona gave us a new range of tools to analyze vegetation from traditional sources as satellite imagery and new sources as drone orthophotos. The appliance of Python programming for crop identification depends on many factors such as the image resolution, the vegetation stage and even the algorithm setup.
We have developed a course crop identification / delineation with geospatial and machine learning tools of Python, the course is aimed to GIS or related professionals that have basic Python knowledge. The course covers the introductory concepts of the geospatial libraries and a series of machine learning applications for crop indentification in olive trees, palms, agave and corn fields.
Note:
This course is for professionals with previous knowledge of Python. Basic concepts of Python programming will not be covered in the lessons and course material. In case you don’t have any knowledge of Python, we recommend you to take this online course.
The Hydrologic Modeling System (HEC-HMS) is a free program developed by the US Corps of Engineers that implements a series of hydrological methods to represent different physical processes of the water cycle.
HEC-HMS also includes procedures necessary for continuous simulation including evapotranspiration, infiltration, hydrological routing and soil moisture accounting. The tools and options of HEC HMS make it a very versatile and powerful software for the hydrological simulation of different scenarios such as extreme events in arid regions, or water balances in wet climates.
Hatarilabs offers the online course of Hydrological Modeling with HEC-HMS for students and professionals of any country. The course is focused on theory and practical to know the different HEC-HMS tools and its application to the hydrological modeling.
Hatarilabs offers the online course of Hydrological Modeling with QSWAT for students and professionals of any country. The course is focused on the acquisition and preprocessing of data for SWAT+ using QGIS 3.4 for develop hydrological watershed modeling.
This course covers the whole procedure of developing regional groundwater models through the ModelMuse interface, including the model construction, boundary conditions, parameter assignment, model simulation, results analysis and visualization, and model calibration. Flopy is also introduced in the course to import, create, refine and simulate the model as in ModelMuse. Two basins with different aquifer setting and boundary conditions are used as case studies to demonstrate the use of these tools so that the participants learn how to build these models and analyze the results for future decision-making.
Evaluation of long term impacts of the mining activity is a key topic on the public concern and regulatory and sustainability policies. Due to the scale of the mining projects and the different related activities, impacts could be made to several parts of the physical environment. Groundwater modeling is a useful tool for the simulation of mine closure impacts to the groundwater flow system and groundwater quality. Hatarilabs has developed an applied course about the simulation, calibration, representation and impact analysis of a waste dump closure on the environment and water bodies with a long term scope (closure and post closure). The course will be given on Model Muse for flow and contaminant transport modeling and scripts in Flopy for model calibration, water balance analysis and evaluation of remediation techniques performance.
This course is focused on how to use the different packages related to numerical tools, data analysis, representation of graphs, and others. Many of these tools are applicable to the field of Hydrology in the preparation of data for hydrological models, statistical analysis of hydrological parameters and model result representation.
Graphical user interfaces (GUIs) are commonly used to construct and post-process numerical groundwater flow. Flopy is the Python library that builds and executes MODFLOW models; this library has tools and options for the complete geo-referencing of a MODFLOW model.
Python is a simple and powerful programming language; its simplicity is remarkable compared to other programming languages and its power is based on the number of tools available for different areas of study.
Use of Python with the available scientific packages and FloPy, facilitates data exploration, alternative model evaluations and model analyses that can be difficult to perform with GUIs. One advantage of Flopy and Python is that there are many packages available to facilitate the model development process, including packages for plotting, array manipulation, optimization, and data analysis.
This course allows acquired knowledge of the open source programming language to construct model input files, run the model, and read and plot simulation results.
LATEST POSTS
This guide covers the installation of MF6Voronoi Studio, a Python-based GUI for Modflow 6 Voronoi mesh generation developed by An Ho Taylor. Watch the video below to learn how to download the setup file, manage installation permissions, and launch the application.
With the upcoming release of mf6Voronoi v0.0.38, optimizing mesh generation workflows remains a top priority. Constructing complex unstructured Voronoi grids for MODFLOW 6 can become computationally intensive as spatial resolution increases. To address this challenge, parallel execution capabilities were introduced into mf6Voronoi leveraging dask-geopandas.
This tutorial explores a powerful interactive GeoPandas tool that facilitates the visual analysis and representation of water chemistry data. Through this Python workflow, you can display sampling points over satellite imagery and various basemaps, map concentrations using automatic color scales, and adjust marker sizes based on analyzed parameters. This direct integration allows you to customize the variables displayed on hover, streamlining data evaluation for baseline studies or water pollution diagnostics.
Interpolating large volumes of spatial data through the QGIS graphical interface is often a headache: the process takes too long or, even worse, the program freezes while consuming all system resources. In this tutorial, we will show you how to interpolate nearly 2 million points in less than two minutes using the OSGeo4W Shell and GDAL commands with the IDW method. By creating a virtual layer file (.vrt), you will learn a highly efficient, reliable, and lightweight workflow that enables you to work with millions of data points without being constrained by the limits of the GUI.
SEARCH
 |
 |
 |
 |
 |
 |
FloPy is the Python library that builds and executes MODFLOW models; this library has been enhanced to provide full support of MODFLOW 6 with most of its recent development is related to functionality for MODFLOW 6, tools to use vector and raster spatial data and common plotting and export functionality.