Hydraulic parameters for an aquifer flow can be expressed on different terms like Hydraulic Conductivity (K) or Transmissivity (T). On the default setup of MODFLOW 2005 with Model Muse there is no option to use directly Transmissivity unless a manual conversion is done to transform into K, this is because the selected flow package is Layer Property Flow (LPF).

When the flow package changes to Block Centered Flow (BCF6) it is possible to insert Transmissivities directly as datasets or as a object property. The BCF package also has more options for the layer type, with unconfined and partial confined aquifer options.

Of the latest devopments in groundwater modeling there are two softwares: Modflow 6 and Model Muse 4. both developed by the USGS. The first software is the latest version of MODFLOW that allows triangular and unstructured grids, and the second is the latest version (from June 23) of the graphical user interface Model Muse that supports Modflow 6.

Unstructured grid it a type of discretization that allows us to have small cells at certain parts of the model while the rest of the model has bigger cells. This optimization of the model grid and cell number decrease the computing time, the size of the output files and the speed of the visualization tools. With unstructured grids we can model a great extension while preserving the right accuracy of the points of interest, we can even insert regional faulting or complex geological setups.

This tutorial shows the complete procedure to create a geospatial model of a alluvial aquifer with the interaction of regional flow, river and wells. The tutorial creates the unstructured grid, boundary conditions, model geometry, simulate flow with MODFLOW 6 and represent results in Model Muse 4.

Cities under high exploitation of groundwater resources face severe problems of land subsidence due to pumping. This complex problem was addressed from earlier versions of MODFLOW as MODFLOW 2000 and has two packages: MODFLOW SUB and  for its simulation with different options for the conceptualization and numerical modeling of normal aquifers and low conductivity interbeds.

Scientific research and professional consulting on the field of land subsidence modeling is limited; this scarcity might be because the coupled complexity of the appliance of numerical groundwater modeling and consolidation theory.

Nature is geospatial, and every physical process related to the groundwater flow and transport regime is spatially located or spatially distributed. Groundwater models are based on a grid structure and models are discretized on cells located on arrangements of rows and columns; is that level of disconnexion of the spatial position of a piece of porous media and the corresponding cell row and column that creates some challenges for the sustainable management of groundwater resources.

We have to create or re-create the duality in between the geospatial and the model grid, that would be similar to duality of a vector GIS object and its metadata on its essence but more difficult to manage. Affortunately Flopy, the Python library to build and simulate MODFLOW models, has tools to georeference the model grid even with rotation options. The workflow is kind of explicit, meaning that the modeler need a medium knowledge of Python and Flopy tools. This tutorial shows the whole procedure to create a fully geospatial groundwater with MODFLOW and Flopy.

On the MODFLOW groundwater model construction process in Model Muse there are tools to import hydrogeological parameters as hydraulic conductivity and boundary conditions from shapefiles assigning the parameter values from the spatial object metadata. This type of workflow is useful for idealized aquifers or simple hydrogeological assessments; however on groundwater models at regional scale the calibration process requires the quick and repetitive change of the hydrogeological parameters and boundary conditions to evaluate the hydraulic response against observed data.

For model calibration the use of Global Variables (Data/Edit Global Variables...) of Model Muse makes relatively easy, ordered and with better change control the calibration process. This tutorial gives the procedure to implement Global Variables for the hydraulic conductivities of 15 hydrogeological units distributed on a model of 560 square kilometers.

Groundwater modeling on the regional scale or with huge baseline can be tedious to do manually in a Graphical User Interface as Model Muse. There are more advanced options to insert a great amount of wells with long and diverse pumping schedules with Flopy or by altering the *.gpt file with some programming effort; however these are kind of intermediate level solutions that would be time expensive for a beginner groundwater modeler.

This tutorial shows the procedure to insert multiple wells with different pumping rates in MODFLOW with Model Muse by the use of some special features. The procedure can insert wells at different depths however it cannot set the well name and in case of wells with multiple pumping records a group of superposed wells will be inserted, one for each pumping rate record.

Groundwater modeling with MODFLOW and other codes are defined as inverse modeling where the aquifer parameters can be calculated from the comparison of model results with observed data. This comparison process is time consuming, employs acceptance criteria and trend analysis of the boundary condition influence.

There are tools for the comparison of observed and simulated heads in Model Muse and custom charts can be done with few lines in Python. This tutorial cover the whole procedure to create a simulated / observed plot in Python from the results of a MODFLOW model run on Model Muse. The study case is over a regional model with more than 100 piezometers. The tutorial creates a graph with a colorbar and exports it as a JPG file.

Pumping well productivity depends of the aquifer porous media, aquifer thickness and extension, physical processes of water cycle relevant to groundwater flow regime, well design and operation considerations. Determination of maximum pumping rate from a well is the key for well construction process because the maximum rate is relevant to pump sizing, licensing, purchase of conduction materials and dimension of water storage facilities. On a project feasibility perpective, the maximum rate estimation is important to meet the project demand on its different stages.

This tutorial shows the complete procedure to determine the maximum pumping rate from a well on a quaternary aquifer on steady state flow conditions with MODFLOW and Model Muse. The tutorial covers all the steps of spatial and temporal discretization, boundary condition setup and hydraulic parameter definition, with an emphasis on the conceptualization of a maximum pumping scenario with operational conditions on the well.

Gempy is as open source Python library for generating full 3D structural geological models. The library is a complete development to create geological models from interfases, faults, and layer orientations, it also relates the sequence of geological layers to represent rock intrusions and faults order.

Algorithm for geological modeling is based on universal cokriging interpolation with the support of high-end Python mathematical libraries as Numpy, PyMC3 and Theano.

Gempy creates a grid model that can be visualized as 2D sections with Matplotlib or as 3D geometrical objects as VTK objects that allow the representation of the geologic models on Paraview for custom slicing, filtering, transparencies, and styling.

This tutorial is a basic example of a stratified geological setup with 5 layers and one fault. In order to make the tutorial fully accessible to the majority of users, we have created a complementary tutorial about how to install Gempy on Windows with a repository distribution of Anaconda.

One of the most exceptional new features from MODFLOW 6 is the different discretization options for the model mesh generation. Options range from regular grid (same as MODFLOW 2005), triangular mesh and unstructured grid. Flopy that is a Python library for the build and simulation of MODFLOW 6 and other models has tools for triangular mesh generation. The workflow on groundwater modeling with MODFLOW 6 and Flopy for triangular mesh models is pretty fluid and we see a lot of potential for local and regional groundwater flow modeling.

This tutorial shows the complete process to create a triangular mesh with the utilities from Flopy and incorporate it to a MODFLOW 6 model. The model is simulated and results are represented as colored mesh and contour lines.