This is an example of calcite dissolution with kinetics where a simplified rate and initial molality are defined. The tutorial covers creation of an input file for Phreeqc, database selection, Phreeqc simulation in Aquifer App and analysis of processed output data on a Jupyter notebook. Finally the molality of Calcium and pH are plotted with time.
Read MoreSometimes we want to reproduce or want to get something similar to a desktop GIS environment on a Jupyter notebook with options to show/hide layers and select background maps, but there was a missing part on our effort and it was the raster representation.
We have developed an applied case of single band raster representation on a Jupyter notebook with Rasterio and Folium. The raster has to be in WGS84 and the script can be coupled with more Folium features for the representation of vector data, background maps, menus and popups.
Read MoreThis is a tutorial of geochemical modeling in Phreeqc and Aquifer App that uses the REACTION keyword for the simulation of irreversible reactions that transfer a certain amount of elements to or from the solution. The selected example deals with the reaction of rainwater with NaCl and Calcite over 4 steps. Phreeqc simulation and model output analysis are performed on the Aquifer App that has great tools for the model setup and the analysis through interactive menus, tables and charts.
Read MoreSimple tutorial that demonstrates the geochemical simulation of surface water and groundwater, and the mixing of both in predetermined proportions. The tutorial shows the creation of an input file (*.in) for Phreeqc, which is then input into Aquifer App to obtain results for both solutions and for the mixture. The modeling and analysis process in Aquifer App are extremely straightforward since the tables and graphs are generated, allowing for quick comparison of data between simulations.
Read MoreThis tutorial cover all the steps to build and run a geochemical model of a water sample in equilibrium with Fluorite and Gypsum. The tutorial explains the parameters to setup a mineral together with and analysis of the element concentrations, the amount of dissolved phases and the final saturation indices.
Read MorePython has awesome packages for machine learning that can be coupled to groundwater models and perform automatic calibration of hydraulic parameters. This tutorial covers the procedure to implement a neural network based on a set of parameters set with corresponding head values; the study case is on a transient pumping test model with an observation point located around 10 meters away from the pump well. The analysis predicts the calibration parameters from the spatially interpolated observed head values.
Read MoreWe did this tutorial since the documentation or examples on the topic were not available. Flopy can export the model grid and model attributes to shapefile with a coordinate system of reference for the three types of discretizations of MODFLOW 6. We have done an applied example to export the grid of a discretized by vertices model (DISV) to the ESRI Shapefile model. The tutorial also show options for the final grid representation in geopandas.
Read MoreNo more installations, no more database link up, no more raw text data as model output. Aquifer App now can run Phreeqc with great tools for the geochemical model setup, database selection and tables / graphics for the different simulation components.
This applied example calculates the distribution of aqueous species in seawater and the saturation state of seawater relative to a set of minerals and is based on the Example 1 of the USGS Phreeqc example documentation.
Read MoreThis tutorial covers the whole procedure to perform a sensitivity analysis over a 72 hour pumping test plus recovery on the hydraulic response in an observation piezometer located at 11 meters from the well. the Since the study case it’s a transient model the sensitivities will vary over time and stage of pumping/recovery.
Read MoreHaving a geological model can enhance numerical models since it allows to represent higher accuracy the potential distribution of hydraulic parameters in the horizontal and vertical direction. The process to implement/insert a geological model into a Modflow model is a challenge due to restrictions on proprietary software and spatial tools; we have done the whole procedure to insert a geological model into a MODFLOW-NWT groundwater model with scripts in Python, Pyvista and others.
The code extracts the cell centroids of the modflow model and then compares its position with the different geological units exported from Leapfrog to Vtk. Once the corresponding lithology of the cell is identified a hydraulic parameter is assigned. The tutorial works from Vtks of a geological model done in Leapfrog, but it can work with any Vtk.
Read MoreThis tutorial shows the complete procedure to convert a geological unit as a Leapfrog mesh (*.msh) to the VTK (Visualization Toolkit) format using Python and GemGIS. Follow these steps to seamlessly transfer your geological data for advanced visualization, analysis and comparison with other model results.
Read MoreBased on a coupled workflow on QGIS and Python it is possible to extract the required information for a Gempy model and run it for defined voxel sizes. This tutorial covers the whole procedure of spatial data preparation, data preprocessing in defined formats and geological modeling with Python and Gempy.
Read MoreGeoreferencing in Python has the advantage that it can be performed repeatedly without the need to define control points each time. It also allows you to add/remove control points and observe the impact on the transformation array. This tutorial demonstrates the complete georeferencing process of a national map using 3 points whose pixel coordinates have been extracted from the Paint utility in Windows. The tutorial also exports the raster while assigning a reference system.
Read MoreWe have done an applied groundwater model for a pumping test on a confined aquifer. The wellsite is located on the Clairborne aquifer (Georgia, USA) and has two observations on different layers besides the well itself. The aquifer test has two periods of pumping and recovery that last 3 days each one and the numerical model was constructed with MODFLOW-6 based on a Python script with the FloPy package. Comparison among observed and simulated wells were done with plots in Matplotlib.
Read MoreTheis (1935) developed a method to estimate values of T and S from pumping test data. Time and drawdown data are measured in an observation well and then matched to the Theis curve. Aquifer App, a web framework for applications in hydrogeology now has a tool for the interpretation of the Hydraulic Transmissivity based on the Theis solution. This is a perfect tool to parametrize homogeneous and confined aquifers on transient state flow conditions.
Read MoreGenerating 3D visualizations of groundwater models is essential to analyze the flow regime, perform quality checks and see the interaction of the groundwater body with external factors / boundary conditions. The Flopy library has tools to export the parameters, boundary conditions and results that we have modified and compiled within a Python class. The use of this class allows the generation of Vtk files on a friendly way and in few steps. The tutorial also includes a representation of the parameters generated in ParaView.
Read MoreWe present our own webapp for the representation of the Piper Diagram, Stiff Diagram and Scholler Diagram. The webapp was developed in Python Django and it is entirely free for everyone. The main objective behind this webapp was to develop a user friendly and minimum requirement tool to create these water quality / hidrogeochemical diagrams. The video tutorial shows the complete procedure to update the working file and then generate the diagrams.
Read MoreAquifer App, a web framework for application in hydrogeology now has a tool for the interpretation of the Hydraulic Transmissivity based on the Thiem solution. This is a perfect tool to parametrize homogeneous and confined aquifers on steady state flow conditions.
Read MoreModflow on parallel processing seemed to lie in the far-off future, but now it’s possible to take advantage of most of your cores to run parallelized versions of MODFLOW 6. Since most MODFLOW modelers work on Windows we wanted to bring something more than a “packed” solution; our goal was to bring an enriched “packed” experience.
Read MoreLithium interaction with the aqueous phase on brines phase is not well understood or at least not well covered by the scientific publications. To evaluate brine composition, brine dynamics and the interaction of the different components is really a challenge with the available tools for geochemical modeling as Phreeqc since it doesn’t appear in all the databases and in most it is only associated with sulfates.
Read More
ONLINE COURSES:
LATEST POSTS
SEARCH
 |
 |
 |
 |
 |
 |
